Thread end rubber joint
- Model:
- -
- Size:
- DN15-DN50
- Pressure:
- PN10,PN16
- Body Materials:
- Forged Iron, NR, NBR, RPDM
- Applicable Medium:
- water, hot water, air etc
- Send us Email
Product Introduction
Yifa thread end Flexible Rubber Joint consist of fabric reinforced and metal flange loose joint, used on shock decrease, compensate for displacement. Threaded double ball joint, which have functioin as high flexiblity, resistance to media and climate , also called rubber joint , shock absorber, pipe shock aborber , but all mean high pressure flexible rubber joint.
Product Features
Yifa thread end rubber joint introduction of foreign advanced production technology, rubber inner layer of the main subject in the high-pressure forming process, nylon cord combine glue better than the other common flexible rubber joint on the marketplace,working pressure goes higher ,the quality become better . The process is characterized by mix within the natural one layer, smooth seamless , labels used vulcanization process mix with the product, the product has obtained national patent .
Technical Parameters
| DN | Length L (mm) | Axial displacement(mm) | Lateral Displacement | Deflection Angle | |||
| mm | inch | A type | B type | extension | compression | (mm) | (a1+a2) |
| 15 | 1/2 | 180 | 200 | 5 | 10 | 20 | 45 |
| 20 | 3/4 | 200 | 200 | 5 | 10 | 20 | 45 |
| 25 | 1 | 210 | 200 | 5 | 10 | 20 | 45 |
| 32 | 1-1/4 | 210 | 200 | 5 | 10 | 20 | 45 |
| 40 | 1-1/2 | 220 | 200 | 5 | 10 | 20 | 45 |
| 50 | 2 | 220 | 200 | 5 | 10 | 20 | 45 |
Technical Standard
| Working pressure | 1.6MPa (16kg f/cm2) | Deflection Angle | (a1+a2)45 |
| Explosion Pressure | 4.8MPa (48kg f/cm2) | Vacume | 53.3KPa(400mmHg) |
| Appliable Tempreture | -15--80 degree,for special requiremetn could reach to-30--+140 degree | ||
| Media | Air, compressed air, water, sea water, hot water, oil, acid and alkali |
